JUKI AMS-210E-1306 Instruction Manual page 101

No. 7-segment display
Lit LED
24
25
26
27
28
29
Description
When copy destination No. is set.
Example) Users' pattern 8
When copy destination No. which has been set already exists.
Example) Users' pattern 200
Deletion No. selection
Example) Users' pattern 1
Number of revolutions in the sewing state display
It is possible to change the number of revolutions during sewing
with key or key. (Change is temporary.)
Example)
Max. number of revolutions : 2,700 rpm
Number of revolutions : 2,000 rpm
Counter value display
Example) Counter value : 9999
Error No. display (Flash)
Example) Error No. 50
Error display
– 97 –
It is indicated that pattern No. to
be copied is being selected.
It is indicated when copy
destination pattern No. which
has been set already exists.
Deletion is indicated.
State of max. number of
revolutions is indicated.
It is indicated that the number of
revolutions has been changed from
max. number of revolutions.
Error No.