Table of Contents
Advertisement
Button and display
SEWING SHAPE NO. display
E
SEWING SHAPE display
F
NEEDLE THREAD TENSION
G
SETTING button
TOTAL NUMBER OF STITCHES
H
OF SEWING SHAPE display
I
COUNTER VALUE CHANGE
button
J
COUNTER CHANGE OVER
button
K
STEP SEWING button
L
FOLDER NO. display
M
SPEED variable resistor
N
X SCALE RATE display
O
X ACTUAL SIZE VALUE display
P
Y ACTUAL SIZE VALUE display
Q
Y SCALE RATE display
R
MAX. SPEED LIMITATION
display
PATTERN REGISTER button
S
Kind and No. of the sewing shape being selected at present is displayed.
There are 4 kinds below of the kinds of sewing shape.
: Users' pattern
: Vector format data
: M3 data
: Sewing standard format
* Be sure to use the smart media that has been formatted with IP-400.
For the formatting procedure of the smart media, refter to
"@-2-26. Performing formatting of the smart
Sewing shape being selected at present is displayed.
Needle thread tension value which is set to the pattern data being selected
at present is displayed on this button and when the button is pressed, the
item data change screen is displayed.
/ Refer to
"@-2-6. Changing item data".
Total number of stitches of the sewing shape being selected at present is
displayed.
* Displayed only when the sewing shape being selected is the standard
pattern.
Existing counter value is displayed on this button.
When the button is pressed, the counter value change screen is displayed.
/ Refer to
"@-2-12. Using
Display of sewing counter/No. of pcs. counter can be changed over.
"@-2-12. Using
/ Refer to
Step sewing screen is displayed. Checking of the pattern shape can be
performed.
/ Refer
"@-2-7. Checking pattern
Pattern register button which is displayed indicates the folder No. which has
been stored.
Number of rotations of the sewing machine can be changed.
Scale rate in X direction of sewing shape being selected is displayed.
Actual size value in X direction of sewing shape being selected is displayed.
Actual size value in Y direction of sewing shape being selected is displayed.
Scale rate in Y direction of sewing shape being selected is displayed.
Maximum speed limitation which is set at present is displayed.However, the
display is different from the maximum number of revolutions in the pattern.
However, the display is different from the maximum number of revolutions
in the pattern.
Pattern register buttons stored in L FOLDER NO. display are displayed.
/ Refer to
"@-2-15. Performing new register of pattern
* This button is not displayed in the initial state.
– 32 –
Description
media".
counter".
counter".
shape".
button".
Advertisement
Table of Contents
