Table of Contents
Advertisement
No.
Presser lifting motion at the end of sewing can be set.
Origin retrieval can be performed every time after end of sewing
(other than combination sewing)
Origin retrieval in combination sewing can be set.
State of presser when sewing machine stops by temporary stop
command can be selected.
Needle stop position is set.
Thread trimming can be prohibited.
Route of return to origin by return to origin button can be
selected.
Item
0 : With presser up
1 : Without presser up
0 : Without origin retrieval
1 : With origin retrieval
0 : Without origin retrieval
1 : Every time 1 pattern is finished.
2 : Every time 1 cycle is finished.
0 : Presser rise.
1 : Presser rise with presser switch.
0 : UP position
1 : Upper dead point
0 : Normal
1 : Thread trimming prohibited
0 : Linear return
1 : Reverse return of pattern
2 : Origin retrieval / Sewing start point
– 100 –
Setting range
Edit unit
---
---
---
---
---
---
---
---
---
---
---
---
---
---
Advertisement
Table of Contents
