JUKI AMS-210E-1306 Instruction Manual page 75

4 Start the measurement.
When START button
each data is started.
F
D
5 Stop the count.
Display the working measurement screen referring to 1) and
2) of "@-2-24.(5) Observing the working measurement
information".
STOP switch
being performed. When STOP switch
measurement is stopped.
After the stop, START button
E
position of STOP button. To continue measuring, press START
button D again. The measured value is not cleared until
CLEAR button
6 Clear the counted value.
When clearing the counted value, set the count to the stop
state and press CLEAR button
* CLEAR button is displayed in case of the stop state only.
G
When CLEAR button
confirmation screen is displayed.
When CLEAR button
confirmation screen, the counted value is cleared.
H
– 71 –
D is pressed, measurement of
E is displayed when the measurement is
D is displayed at the
F is pressed.
G .
G is pressed, the clear
H is pressed in the clear
E is pressed, the