JUKI AMS-210E-1306 Instruction Manual page 73

M
N
5 Start the count of number of pieces of production.
When START button
of pieces of production is started.
K
I
6 Stop the count.
Display the production control screen referring to
"@-2-24.(3) Observing the production control
information".
When the count is being performed, STOP switch
displayed. When STOP button
is stopped.
After the stop, START button
J
position of STOP button. When continuing the count, press
START button
cleared until CLEAR button
7 Clear the counted value.
When clearing the counted value, set the count to the stop
state and press CLEAR button
The value to be cleared is the present target value M and
L
actual results value N only.
* CLEAR button is displayed only in case of stop state.
When CLEAR button
confirmation screen is displayed.
When CLEAR button
confirmation screen. the counted value is cleared.
O
– 69 –
I is pressed, the count of number
J is pressed, the count
I is displayed at the
I again. The counted value is not
K is pressed.
L .
L is pressed, the clear
O is pressed in the clear
J is