JUKI AMS-210E-1306 Instruction Manual page 113

Error code
E018
E019
E022
E024
E027
E028
E029
E030
E031
E032
E040
Description of error
Type of EEP-ROM is different.
When the mounted EEP-ROM is different in type.
File size over
File is too large.
File No. error
Designated file is not in server or smart media.
Pattern data size over
Memory size is over.
Read error
Data read from server cannot be performed.
Write error
Data write from server cannot be performed.
Smart media slot release error
Lid of smart media slot is open.
Needle bar upper position failure
Needle bar is out of needle UP position.
Air pressure drop
Air pressure is dropped.
File interchanging error
File cannot be read.
Sewing area over
– 109 –
How to recover Place of recovery
Previous
screen
Possible Previous
to re-start screen
after reset.
Possible Previous
to re-start screen
after reset.
Possible
Data input
to re-start
screen
after reset.
Possible Previous
to re-start screen
after reset.
Possible Previous
to re-start
screen
after reset.
Possible Previous
to re-start screen
after reset.
Turn hand Data input
pulley
screen
to bring
needle bar
to its UP
position.
Possible
Data input
to re-start
screen
after reset.
Possible Data input
to re-start screen
after reset.
Possible Sewing
to re-start
screen
after reset.