TANDBERG Media Processing System MPS 200 Administrator's Manual page 89

PRI Board
PRI Board in Slot 1-n (2:3)
PRI Board Configuration
Please ensure that Network Type
!
PRI Network Configuration
correct ISDN cards in the
Speech Timers
On:
If set to on, this will turn on Layer 3 timers T310, T304
and T301 for telephone calls (Default: On).
Off:
If set to off, this will turn off Layer 3 timing.
NSF Telephony Mode
On:
If set to on, NSF service code for telephone calls will be
enabled.
Off: If set to off, NSF service code will be disabled (Default:
Off).
NSF Telephony Number
Your network provider may require a service selection in your
ISDN configuration.
Enter the Service code here. Valid NSF service codes are
from 0 to 31 (National, AT&T or Japan/Taiwan ISDN).
NSF Video Mode
On:
If set to on, NSF service code for video calls will be
enabled.
Off: If set to off, NSF service code will be disabled (Default:
Off).
NSF Video Number
Your network provider may require a service selection in your
ISDN configuration.
Enter the Service code here. Valid NSF service codes are
from 0 to 31 (National, AT&T or Japan/Taiwan ISDN).
NSF - Network Specific Facilities
Read about NSF Service Codes in Technical Descriptions.
Table of
Main Introduction
Contents
D 13373.08
NOVEMBER 2007
is set to PRI for the
.
Quick
Installation
Setup
Network Configuration
Save - Press the Save button to save changes.
System
Using System
Configuration
the MPS Status
89
Gateway MCU Technical
Configuration Configuration Descriptions
TANDBERG MPS
ADMINISTRATOR GUIDE
Appendices
MPS