TANDBERG Media Processing System MPS 200 Administrator's Manual page 171

Approvals
Product Approvals and Declarations
Product Approvals
The product has been approved by various international ap-
proval agencies, among others: CSA and Nemko. According to
their Follow-Up Inspection Scheme, these agencies also perform
production inspections at a regular basis, for all production of
TANDBERG's equipment.
The test reports and certificates issued by the approval agen-
cies show that the TANDBERG MPS complies with the following
standards.
EMC Emission - Radiated Electromagnetic Interference
•
EN55022:1994 + A1:1995 + A2:1997 (CISPR 22:1993 +
Corr. and Am.1 and Am.2) Class A (Comply with EU's Com-
mission Decision 89/336/EEC).
•
FCC Rules and Regulations Part 15, Subpart B, Class A.
EMC Immunity
•
EN 55024:1998 + A1:2001 + A2: 2003
•
EN 61000-3-2:2000
•
EN 61000-3-3:1995 + A1:2001
•
(Comply with EU's Commission Decision 89/336/EEC).
Electrical Safety
•
IEC 60950-1 edition 2001
•
EN 60950-1 edition 2001 +A11:2004
•
UL 60950-1. 1st Edition
•
CSA 60950-1-03
Table of
Main Introduction
Contents
D 13373.08
NOVEMBER 2007
EC DECLARATION OF CONFORMITY TANDBERG MPS 200
MANUFACTURER: TANDBERG Telecom AS
PRODUCT NAME: TANDBERG MPS 200
TYPE NUMBER: TTC3-02
DESCRIPTION: Media Processing System
This product complies with Commission Directives:
LVD 73/23/EEC
EMC 89/336/EEC
R&TTE 99/5/EEC
This product complies with harmonized standards:
EN 60950-1 : 2001
EN 55022 : 1994, A1/A2
EN 55024 : 1998, A1/A2
EN 61000-3-2 : 2000
EN 61000-3-3 : 1995, A1
TBR 4 Layer 1, 2 and 3
TECHNICAL CONSTRUCTION FILE NO.: X13513
YEAR WHICH THE CE-MARK WAS AFFIXED: 2005
For an official, signed version of this document, or details
regarding documentation from the technical construction file,
please contact TANDBERG
A
WARNING:
This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Quick Using
Installation
Setup the MPS
CE Declarations
A Class Product Declaration
System System
Status Configuration
171
EC DECLARATION OF CONFORMITY TANDBERG MPS 800
MANUFACTURER: TANDBERG Telecom AS
PRODUCT NAME: TANDBERG MPS 800
TYPE NUMBER: TTC3-01
DESCRIPTION: Media Processing System
This product complies with Commission Directives:
LVD 73/23/EEC
EMC 89/336/EEC
R&TTE 99/5/EEC
This product complies with harmonized standards:
EN 60950-1 : 2001
EN 55022 : 1994, A1/A2
EN 55024 : 1998, A1/A2
EN 61000-3-2 : 2000
EN 61000-3-3 : 1995, A1
TBR 4 Layer 1, 2 and 3
TECHNICAL CONSTRUCTION FILE NO.: D13391
YEAR WHICH THE CE-MARK WAS AFFIXED: 2004
For an official, signed version of this document, or details
regarding documentation from the technical construction file,
please contact TANDBERG.
Gateway MCU Technical
Configuration Configuration Descriptions
TANDBERG MPS
ADMINISTRATOR GUIDE
Appendices
MPS