Electrical Supply - Biasi BASICA COND User Manual And Installation Instructions

the boiler cold supply, within the requirements
of the local water company.

5.11 Electrical supply

Warning, this appliance must be earthed.
External wiring to the appliance must be car-
ried out by a competent person and be in ac-
cordance with the current I.E.E. Regulations
and any local regulations which apply.
Reference should be made to the current
ETCI rules for electrical installations.
For Ireland (IE), refer to I.S.813.2002.
The boiler is supplied for connection to a
230 V~ 50 Hz supply.
The mains supply to this appli-
ance must be protected with a 3A
mains fuse, under no circum-
stance should this fuse rating be
exceeded.
The method of connection to the electricity
supply must facilitate complete electrical iso-
lation of the appliance by the use of a fused
spur isolation switch. Its installation permits a
complete switching off in the conditions of the
overvoltage category III. Alternatively it can be
connected with a 3A fused three pin plug and
unswitched shuttered socket outlet both com-
plying with BS 1363.
The point of connection to the electricity sup-
ply must be readily accessible and adjacent to
the appliance, except where the appliance is
installed in a bathroom, this must then be sited
outside the bathroom.
GENERAL REQUIREMENTS
- 43 - - 43 -