Biasi BASICA COND User Manual And Installation Instructions page 71

Fig. 8.46
• Press 12 (Fig. 8.31) to confirm the value
entered and return to the list of param-
eters (Fig. 8.45).
• Press button 12 and hold until the LCD
display shows the code A38, indicating
entry into "parameter A38" (Fig. 8.47).
Fig. 8.47
• By using buttons 15 or 16 (Fig. 8.31) it is
possible to modify the value of parameter
A38 (Fig. 8.48).
60 = Default
10 = Correct
Fig. 8.48
• Press 12 or 13 (Fig. 8.31) to confirm the
value entered and return to the list of pa-
rameters (Fig. 8.45).
• Press the 17 button (Fig. 8.31) to exit "pro-
gramming mode".
ADVANCED COMMISSIONING
RESET
bar
RESET
bar
RESET
bar
- 71 -