Connectivity - AGFA 5522/100 User Manual

WS-Manual-001, WS-Manual-T-001, WS-Manual-002, WS-Manual-T-002 | Introduction to DR 400 |

Connectivity

The NX workstation is connected to the X-ray system to exchange X-ray
exposure parameters.
The NX workstation requires a 100 Mbit ethernet network to exchange
information with a number of other devices.
The NX workstation communicates with other devices in the hospital network
using one of the following protocols:
• DICOM
• IHE
The NX workstation can be connected to a RIS system (input scheduling), a
PACS system (output image/data management) and to a hardcopy device
(output image).
Note: The connections between the components of the system are
separate from the hospital network and should not be disconnected
or modified.
3252C EN 20191206 1610
21