Radiographic Wall Stand Accessories - AGFA 5522/100 User Manual

WS-Manual-001, WS-Manual-T-001, WS-Manual-002, WS-Manual-T-002 | Operation | 49

Radiographic Wall Stand Accessories

Topics:
• Patient hand grips
• Mounting the overhead handle
• Spacer
• Wall stand fixation kit
Patient hand grips
The patient hand grips for wall stand are mounted fixed at the backside of the
bucky. The patient uses these grips for stabilization and support of correct
correct positioning, e.g. for chest exams.
Figure 11: Patient hand grips
Mounting the overhead handle
Take care that the overhead handle does not collide with the ceiling when
moving the bucky upward manually. For automatic movement, a sensor
detects if the overhead handle is inserted and the movement is coordinated
accordingly.
Do not insert the handle oriented parallel to the bucky. The handle may
collide with the wall stand column.
To mount and position the overhead handle:
1. Insert the handle on the left or on the right side of the bucky frame.
WARNING:
Using wrong accessories that cannot be properly attached to the
system can lead to hazardous situations and injury. Use only
original accessories provided by the manufacturer.
CAUTION:
The overhead handle can bear up to 20 kg. It is not intended to
hold the whole weight of a patient.
3252C EN 20191206 1610