Table of Contents
Advertisement
50 | WS-Manual-001, WS-Manual-T-001, WS-Manual-002, WS-Manual-T-002 | Operation
2. Grip the lower part of the handle.
3. Pull the handle forward
4. Adjust the angle.
5. Move the handle back to fix the position.
Figure 12: Overhead handle
Movement of the X-ray tube head is restricted in the neighbourhood of the
handle, to avoid collisions. To allow free movement of the tube head, the
handle must be unmounted from the wall stand. It is not sufficient to turn it
90 degrees out of the way.
Spacer
The spacer allows examination of sitting patients by offering additional space
to position legs and feed under the bucky.
Figure 13: Spacer
Wall stand fixation kit
For additional stability of the radiographic wall stand an additional fixation of
the radiographic wall stand is provided. The kit is installed at backside of the
radiographic wall stand under the head cover and then fixed to a wall. It has
to be installed by service.
3252C EN 20191206 1610
4
1
2
5
3
Advertisement
Table of Contents
