Bank Angle Indicators; Tyres - Triumph Street Triple S Owner's Handbook Manual

Hide thumbs Also See for Street Triple S:
Table of Contents

Advertisement

MAINTENANCE
180

Bank Angle Indicators

Always
replace
indicators before they are worn to
their maximum limit.
Use of a motorcycle with bank angle
indicators worn beyond the maximum
limit will allow the motorcycle to be
banked to an unsafe angle.
Banking to an unsafe angle may cause
instability, loss of motorcycle control
and an accident.
Bank angle indicators are located on the
rider's footrests.
1
1. Bank angle indicator
2. Maximum wear limit groove
Bank angle indicators must be replaced
when they have worn down to the
maximum wear limit. The maximum
wear limit is shown by a groove on the
bank angle indicator.
Regularly
indicators for wear.
Warning
the
bank
check
the
bank

Tyres

angle
This model is fitted with tubeless tyres,
valves and wheel rims. Use only tyres
marked 'TUBELESS' and tubeless valves
on
rims
TUBELESS TYRES'.
Do not install tube type tyres on
tubeless rims.
The bead will not seat and the tyres
could slip on the rims, causing rapid
tyre deflation that may result in a loss
of motorcycle control and an accident.
Never install an inner tube inside a
tubeless tyre without the appropriate
marking. This will cause friction inside
the tyre and the resulting heat build-
2
up may cause the tube to burst
resulting in rapid tyre deflation, loss of
motorcycle control and an accident.
angle
marked
'SUITABLE
Warning
FOR

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Street triple rStreet triple rs

Table of Contents