Seats; Seat Care; Rider's Seat - Triumph Street Triple S Owner's Handbook Manual

GENERAL INFORMATION
114

Seats

Seat Care

To prevent damage to the seat or seat
cover, care must be taken not to drop
the seat. Do not lean the seat against
the motorcycle or any surface which
may damage the seat or seat cover.
Instead, place the seat, with the seat
cover facing upwards, on a clean, flat
surface which is covered with a soft
cloth.
Do not place any item on the seat
which may cause damage or staining
to the seat cover.
See page 201
information.
Caution
for seat cleaning

Rider's Seat

cjxd
1. Rider's seat fixing
To remove the rider's seat:
▼ Remove the passenger seat or seat
cowl (see page 115).
▼ Remove the fixing located to the rear
of the padding. This will allow the
rider's seat to slide up and rearwards
for complete
motorcycle.
To refit the seat:
▼ Engage the seat's tongue under the
fuel tank.
▼ Fit and tighten the fixing to 9 Nm.
▼ Refit the passenger seat or seat cowl
(see page 115).
Warning
The rider's seat is only correctly
retained and supported once the
fixing is correctly tightened.
Never ride the motorcycle with the
fixing loose or removed, as the rider's
seat will not be secure and may move.
A loose or detached seat may cause
loss of motorcycle control and an
accident.
1
removal from the