Triumph Street Triple S Owner's Handbook Manual page 89

Note
The motorcycle is delivered from the
factory with the gear change light set
to the 6 LED mode at 3,500 rpm.
When the gear change light mode has
been selected, the tachometer needle
will move round to the current set
position. The rpm will be shown in the
display screen with the current set
units flashing.
2
3 1
1. Current set units
2. SCROLL button
3. SET button
Changing the Set Engine Speed
To change the engine speed setting:
▼ Press the scroll
individual press
button will increase the setting in
increments of 500 rpm, up to the
maximum rpm
maximum rpm limit is reached, the
setting will return to 3,500 rpm.
▼ When the correct setting is shown,
press the SET button to confirm the
setting, SHIFt will be shown in the
display screen and all the gear
change lights will flash.
▼ Press and release the SCROLL button
until REtURn is shown in the display
screen then press the SET button.
TC
TC
button. Each
of the SCROLL
limit. When the
GENERAL INFORMATION
Setting the Gear Change Lights to Off
3
1
4
1. Gear change lights
2. Display screen (OFF mode shown)
3. SCROLL Button
4. SET Button
To turn the gear change lights to OFF:
▼ Press and release the SELECT button
until OFF is shown then press the
SET button.
▼ Press the SET button and SHIFt will
be shown in the display screen.
▼ Press and release the SCROLL button
until REtURn is shown in the display
screen then press the SET button.
2
89