Rear Suspension Rebound Damping Adjustment - Triumph Street Triple S Owner's Handbook Manual

Rear Suspension Spring Preload
Adjustment
Street Triple S (660cc)
The spring preload adjuster is located at
the top of the rear suspension unit.
2
cjxi
1. Peg
2. Position 1 (minimum adjustment)
3. Adjustment tool
To change the spring preload setting:
▼ Insert the adjustment tool supplied
in the tool kit into the slot in the
adjuster ring.
▼ Turn the adjuster ring anticlockwise
to increase spring
clockwise to decrease spring preload.
▼ When delivered from the factory, the
spring preload adjuster will be set to
the Solo Riding position as shown in
the suggested suspension settings
table.
▼ Adjuster settings are counted from
position one with position one being
with the adjuster
clockwise. Position one gives the
minimum amount of spring preload.
Rear Suspension Rebound Damping
Adjustment
Street Triple R
The
located at the bottom of the rear
suspension unit on the left hand side of
the motorcycle.
1
3
cjye
1. Slotted adjuster
To change the rebound damping setting:
▼ Rotate the slotted adjuster clockwise
preload, and
turned fully
MAINTENANCE
rebound damping
1
to increase rebound damping and
anticlockwise to decrease.
177
adjuster is