Triumph Street Triple S Owner's Handbook Manual page 91

Tyre Pressure Units - only if TPMS is
fitted
5
6
1. TPMS symbol
2. Front tyre indicator
3. Rear tyre indicator
4. Tyre pressure display
5. Scroll button
6. Set button
To access the tyre pressure display:
▼ Press and release the SCROLL button
until SEtUP is shown in the display
screen.
▼ Press and release the SET button.
▼ Press and release the SCROLL button
until UnitS is shown in the display
screen.
▼ Press and release the SET button to
select the pressure display.
▼ Press and release the SCROLL button
to scroll between BAR or PSI.
▼ Press and release the SET button to
select either BAR or PSI.
▼ When the tyre pressure monitoring
system has been selected, —— PSI or
bAR will be shown in the display
screen until
travelling at a speed greater than 12
mph (20 km) and the tyre pressure
signal is received.
3
1 2
4
the motorcycle
GENERAL INFORMATION
To exit the tyre pressure display:
▼ Press and release the SCROLL button
until REtURn is shown.
▼ Press and release the SET button to
return to the TRIP screen
Return
Select REtURn to return to the main
display.
is
91