Table of Contents
Advertisement
Maintenance and Adjustment
Rear Suspension Compression
Damping Adjustment - Thruxton R
Only
1
ciyq
1.
Rear suspension compression damping
adjuster
The compression damping adjuster is
located
at
the
suspension unit.
To change the compression damping
setting:
Rotate
the
adjuster
increase,
or
decrease.
Note:
•
The setting is measured as the
number of adjuster clicks counter-
clockwise from the fully clockwise
position.
•
The motorcycle is delivered from
the factory with the compression
damping
set
setting, as shown in the relevant
suspension chart (see page 113).
116
top
of
the
clockwise
counterclockwise
at
the
Standard
Bank Angle Indicators
Use of a motorcycle with bank angle
indicators worn beyond the maximum
limit will allow the motorcycle to be
banked to an unsafe angle.
Banking to an unsafe angle may cause
instability, loss of motorcycle control
and an accident.
Bank angle indicators are located on the
rider's footrests.
Regularly
indicators for wear.
Bank angle indicators must be replaced
when they have reached the maximum
wear limit of 0.2 in (5 mm) in length.
rear
to
to
citc
1.
Bank angle indicator
Warning
check
the
bank
angle
1
Advertisement
Chapters
Table of Contents
