Rear Suspension Compression
Damping Adjustment
The
compression
is located at the top of the rear
suspension unit.
1.
Rear suspension compression damping
adjuster
To adjust the compression damping
setting:
•
Rotate the compression damping
adjuster clockwise to increase (H =
harder
suspension),
clockwise to decrease (S = softer
suspension).
•
Always
count
adjuster
clicks
from the fully clockwise position.
Maintenance and Adjustment
damping
adjuster
1
or
counter-
the
number
of
counterclockwise
Bank Angle Indicators
Warning
Always
replace
indicators before they are worn to
their maximum limit.
Use of a motorcycle with bank angle
indicators worn beyond the maximum
limit will allow the motorcycle to be
banked to an unsafe angle.
Banking to an unsafe angle may cause
instability, loss of motorcycle control
and an accident.
Bank angle indicators are located on the
rider's footrests.
1.
Bank angle indicator
Bank angle indicators must be replaced
when they have reached the maximum
wear limit of 0.59 in (15 mm) in length.
The maximum wear limit is shown by a
groove on the bank angle indicator.
Regularly
check
indicators for wear.
the
bank
angle
1
the
bank
angle
149