Selecting A Riding Mode - Motorcycle Moving - Triumph Street Triple S Owner's Handbook Manual

Selecting a Riding Mode –
Motorcycle Moving
Warning
The selection of riding modes whilst
the motorcycle is in motion requires
the rider to allow the motorcycle to
coast (motorcycle
running, throttle closed and no brakes
applied) for a brief period of time.
Riding mode selection
motorcycle is in motion should only be
attempted:
- At low speed
- In traffic free areas
- On straight and level roads or
surfaces
- In good road and weather conditions
- Where it is safe to allow the
motorcycle to briefly coast.
Riding mode selection
motorcycle is in motion MUST NOT be
attempted:
- At high speeds
- Whilst riding in traffic
- During cornering or on winding
roads or surfaces
- On steeply inclined roads or surfaces
- In poor road/weather conditions
- Where it is unsafe to allow the
motorcycle to coast.
Failure to observe this important
warning will lead to loss of motorcycle
control and an accident.
moving, engine
whilst the
whilst the
GENERAL INFORMATION
To select a riding mode when the
motorcycle is moving:
▼ Press and release the MODE button
on the left handlebar switch housing
until the required riding mode is
flashing in the display.
1. Selected riding mode (flashing)
2. Current (active) riding mode
▼ The selected
automatically activated if within 30
seconds of pressing
button the following has been carried
out simultaneously:
– Throttle closed.
– Brakes not applied (allow the
motorcycle to coast).
1. Selected riding mode
1
2
riding mode is
the MODE
1
103