Rear Brake Fluid Level Inspection And Adjustment - Triumph Street Triple S Owner's Handbook Manual

To adjust the brake fluid level:
▼ Release the reservoir cap retaining
screws and remove the reservoir cap
and the diaphragm seal.
▼ Fill the reservoir to the upper level
line using new DOT 4 from a sealed
container.
▼ Refit the reservoir cap making sure
that the diaphragm seal is correctly
positioned between the reservoir cap
and the reservoir body.
▼ Tighten the reservoir cap retaining
screws to 1 Nm.
MAINTENANCE
Rear Brake Fluid Level Inspection
and Adjustment
Warning
If there has been an appreciable drop
in the level of the fluid in either fluid
reservoir, consult
Triumph dealer
riding.
Riding with depleted brake fluid levels,
or with a brake fluid leak is dangerous
and will cause
performance potentially leading to loss
of motorcycle control and an accident.
The reservoir is visible from the right
hand side of the motorcycle, forward of
the silencer, below the rider's seat.
chrk
1. Upper level line
2. Lower level line
To inspect the rear brake fluid level:
▼ Check the level of brake fluid visible
in the reservoir.
▼ The brake fluid level must be kept
between the upper and lower level
lines (reservoir held horizontal).
your authorised
for advice before
reduced brake
1
2
165