Main Menu - Triumph Street Triple S Owner's Handbook Manual

Motorcycle Stationary - Engine Off
▼ The ignition is switched ON.
▼ The engine stop switch is in the RUN
position.
Motorcycle Stationary - Engine Running
▼ Neutral gear is selected or the clutch
is pulled in.
Motorcycle in Motion
Within 30 seconds of selecting a riding
mode the rider must carry out the
following simultaneously:
▼ Close the throttle.
▼ Make sure that the brakes are not
engaged (allow the motorcycle to
coast).
If a riding mode
completed, the riding mode icon will
alternate between the previous riding
mode and the newly selected riding
mode until the change is complete or it
is cancelled.
The riding mode selection is now
complete and normal riding can be
resumed.
Note
It is not possible to select TRACK or
RIDER modes whilst the motorcycle is in
motion, if the TC settings are set to
TRACK or OFF in either of those modes.
In this case, the motorcycle must be
brought to a stop before the riding mode
change can take place.
change is not
GENERAL INFORMATION

Main Menu

To access the Main menu:
▼ The motorcycle must be stationary
with the ignition switched on.
▼ Press the HOME button on the right
handlebar switch housing.
▼ Scroll the Main menu by pushing the
joystick down/up until the required
option is selected and then press the
joystick centre to confirm.
MAIN MENU
RIDING MODES
BIKE SET UP
TRIP SET UP
DISPLAY SET UP
LAP TIMER
RESET TO DEFAULTS
BACK
Main Menu Screen
The Main menu allows access to the
following options:
Riding Modes
This menu allows configuration of the
riding modes. For more information, see
page 55.
Bike Set Up
This menu allows configuration of the
different features of the motorcycle. For
more information, see page 55.
Trip Set Up
This menu allows configuration of Trip 1
and Trip 2. For more information, see
page 58.
Display Set Up
This menu allows configuration of the
display options. For more information,
see page 60.
EXIT SELECT
53