Triumph Street Triple S Owner's Handbook Manual page 56

GENERAL INFORMATION
56
Bike Set Up - TSA (Shift Assist) (if
fitted)
Triumph Shift Assist (TSA) triggers a
momentary engine torque change to
allow gears to engage, without closure
of the throttle or operation of the
clutch. This feature works for both up-
changes and down-changes of gear.
The clutch must be used for stopping
and pulling away.
TSA will not operate if the clutch is
applied or if an up-change is attempted
by mistake when in 6th gear.
It is necessary to use a positive pedal
force to make sure there is a smooth
gear change.
To enable/disable TSA:
▼ From the Bike Set Up menu, push the
joystick down to select TSA (SHIFT
ASSIST) and press the joystick to
confirm.
▼ Push the joystick down/up to scroll
between ENABLED and DISABLED.
▼ Press the joystick centre to confirm
the required selection.
▼ The display will then return to the
Bike Set Up menu.
For more information on Triumph Shift
Assist (TSA), see page 125.
TSA (SHIFT ASSIST)
ENABLED
DISABLED
BACK EXIT SELECT
Bike Set Up - Direction Indicators
The direction indicators can be set to
Auto Basic, Auto Advanced or Manual
mode.
INDICATORS
AUTO BASIC
AUTO ADVANCED
MANUAL
BACK
Selecting a Direction Indicators Mode
To select the
indicators mode:
▼ From the Bike Set Up menu, push the
joystick down to select INDICATORS
and press the joystick centre to
confirm.
▼ Push the joystick down/up to scroll
between AUTO
ADVANCED and MANUAL.
– Auto Basic - The self-cancelling
function is on. The direction
indicators will activate for eight
seconds and an additional 65
metres.
– Auto Advanced
cancelling function is on. A short
press activates
indicators for three flashes. A
longer press
direction indicators
seconds and an additional 65
metres.
– Manual -
function is off. The direction
indicators must
cancelled using
indicator switch.
EXIT SELECT
required direction
BASIC, AUTO
- The self-
the direction
activates the
for eight
The self-cancelling
be manually
the direction