Triumph Street Triple S Owner's Handbook Manual page 95

New Lap Recording
1
1. Starter button
At the end of the lap, pressing the
starter button again will register the
start of a new lap. The display will show
the last lap time for five seconds then
the new lap number for five seconds.
After this time, the speedometer display
will show the current lap number and
the display screen will show the current
lap time.
GENERAL INFORMATION
Data Retrieval Mode
The data retrieval mode cannot be
accessed whilst the motorcycle is in
motion.
The data retrieval
accessed in one of two ways:
▼ With the ignition in the ON position,
from the lap timer display, press
button B.
▼ From the data recording mode, with
the engine
motorcycle stationary,
starter button for two seconds. This
will return the display to the Lap
display. Press button B.
1
4
5
3
1. Lap number
2. Stopwatch icon
3. Lap timer
4. Button A
5. Button B
When the data
accessed, the lap time for the first lap
will be shown. The lap number will be
shown in the speedometer display
position.
Press and release button A until the
required lap (up to a maximum of 50
laps) is shown.
mode can be
running and the
press the
2
retrieval mode
95
is