Triumph Street Triple S Owner's Handbook Manual page 59

Trip Set Up - Automatic Reset
To set the trip
automatically reset:
▼ From the TRIP SETUP menu, push
the joystick down/up and then press
the joystick centre to select TRIP 1
RESET or TRIP 2 RESET.
▼ Push the joystick down/up to select
AUTOMATIC and then press the
joystick centre to confirm.
▼ Using the joystick down/up, choose
the timer setting and press the
joystick centre
required time limit.
▼ The required time limit is then stored
in the trip memory. A tick is shown to
indicate the selected option.
▼ When the ignition is turned off, the
trip meter is set to zero when the
time period has elapsed.
AUTOMATIC
2 HRS
4 HRS
8 HRS
12 HRS
16 HRS
BACK
The following table shows two examples
of the automatic trip reset functionality.
Ignition Selected
Turned Off Time Delay
10:30 hrs 4 HRS
18:00 hrs 16 HRS
computer
to confirm the
1 HR
EXIT SELECT
Trip Meter
Resets to
Zero
14:30 hrs
10:00 hrs
(next day)
GENERAL INFORMATION
Trip 2 Enable/Disable
to Trip 2 meter can be enabled or disabled.
If trip 2 meter is disabled, it will no
longer be shown in the information tray.
To enable or disable the Trip 2 meter:
▼ From the TRIP SET UP menu, push
the joystick down/up to scroll to the
TRIP 2 DISPLAY. Press the joystick
centre to confirm.
▼ Push the joystick down/up to scroll
between ENABLED and DISABLED.
Press the joystick centre to confirm.
A tick is shown to indicate the
selected option.
TRIP 2 DISPLAY
ENABLED
DISABLED
BACK EXIT SELECT
59