Setting The Rider Mode Options - Triumph Street Triple S Owner's Handbook Manual

TC Options
Optimal TC setting for
road use for wet or
Rain
slippery conditions, allows
minimal rear wheel slip.
Optimal TC setting for
Road road use, allows minimal
rear wheel slip.
TC is set up for road use,
allowing increased rear
Sport
wheel slip when compared
to the Road setting.
TC is set up for track use,
allowing increased rear
Track
wheel slip when compared
to the Sport setting.
TC is turned off. The TC
disabled warning light will
Off
be illuminated (see
page 81).
For details on setting the RIDER Mode
options, see page 99.

Setting the RIDER Mode Options

During setup, TC can be activated or de-
activated in the RIDER mode.
If the RIDER mode is currently selected,
changes to the MAP, ABS and TC
systems will become immediately active.
If the ROAD or TRACK modes are
selected the RIDER settings will not
become active until the RIDER mode is
selected (see page 97).
GENERAL INFORMATION
To set the RIDER mode options; with the
motorcycle stationary and in neutral,
turn the ignition to the ON position.
▼ Press and release the MODE button
on the left handlebar switch housing
until RIDER mode is selected.
▼ Press and hold the MODE button
until MAP is shown in the display
screen.
or alternatively:
▼ Press and release
button until SEtUP is shown in the
display screen. Press the SET button
to confirm.
▼ Press and release the SCROLL button
until RIdER is shown in the lower
instrument display, then press the
SET button to confirm.
RIdER Shown
99
the SCROLL