Install Handle Bars - Master AB Ring Pro User Manual

EN
Front End Caps
Place plastic end caps securely over open
ends of front base tubing.
Rear Legs
Insert safety pins into rear support holes
of both rear legs.
Rear End Caps
As on front legs,insert plastic end caps
securely over open end of rear base
tubing.
Screw on Knee Bowls
Insert a knee bowl screw inside a collar
and attach a knee bowl using the knee
bowl lock tool to each swing arm on the
base unit.place a knee bowl center hole
cap over each knee bowl screw.

Install Handle Bars

Insert left arm handle into the arm opening
on the left side and the right arm handle
into the arm opening on the right side so
that the hand grips face inward.Adjust the
arm handles to your preferred length using
the U bolts,based on your height and level
42