Table of Contents
Advertisement
63-601 Genesis Models ED1 & ED2 Multiphase Detector
3.0
Advanced Configuration/
Troubleshooting Techniques
This section contains information regarding some of the
advanced configuration and troubleshooting capability con-
tained within the Genesis. These diagnostic options are best
suited for use with PACTware and the Genesis DTM, and
should be implemented only after contacting
Technical Support.
3.1
Buildup Detection (FUTURE)
A unique feature contained within the Genesis can be used
to obtain an indication of buildup along the length of the
probe. This can be set as the HART SV, TV or QV which
can be monitored in the control room. An algorithm
compares the buildup echo strength as compared to the
Lvl Thrsh Value, and outputs value in percent.
3.1.1 Buildup Detection Setup using PACTware
Buildup detection is a feature that needs to be turned on in
Advanced Config, see below.
Magnetrol
45
Advertisement
Table of Contents
Troubleshooting
