Menu: Step-By-Step Procedure - Genesis ED1 Installation And Operating Manual

Up Down
63-601 Genesis Models ED1 & ED2 Multiphase Detector

1.5.4 Menu: Step-By-Step Procedure

Back Enter
dvanced Password
Certain portions of the menu structure that contain more
advanced parameters are further protected by an Advanced
Password.
This password will be provided, when necessary, by
Factory technical support.
Factory Password
Calibration-related and other factory settings are further
protected by a Factory Password.
The chart in the following section provides an overview of
the menus and parameters as displayed by the Genesis.
The menu layout is similar between the local
Keypad/LCD interface, the DD, and the DTM.
Use this chart as a step-by-step guide to configure the unit
to measure the various level in the vessel.
HOME SCREEN
The Home Screen consists of a "slide show" sequence of
Measured Values screens which are rotated at 2-second
intervals. Each Home screen can present up to four items
of information:
• HART Tag
®
• Measured Value
Label, Numerical Value, Units
• Status
Will be displayed as text or optionally with NAMUR NE
107 symbol
• Primary Value Bar Graph (shown in %)
The Home Screen presentation can be customized by
viewing or hiding some of these items. See DISPLAY
CONFIG under the DEVICE SETUP menu in Section
1.5.4 — Basic Configuration Menu.
At left is an example of a Home Screen for a Model ED1
configured to show the interface (water) level.
13