Model Number; Main Electronics - Genesis ED1 Installation And Operating Manual

2.7

Model Number

2.7.1 Detector
While both versions of Genesis are robust designs capa-
ble of performing similar functions, the Model ED1 is
the full-featured detector that comes standard with all
(4) analog outputs; an enhanced DTM for dynamic
viewing of all levels; and was the basis for developing the
sophisticated algorithms that allow us to measure the
most difficult levels found in the process industries.
The Model ED1 is particularly suited for the down-
stream Oil & Gas market (Petroleum Refining) where it
1 2 3 BASIC MODEL NUMBER
E D 1 Genesis High Performance Multiphase Detector
E D 2 Genesis Standard Multiphase Detector
4 POWER
E D
1 2 3
63-601 Genesis Models ED1 & ED2 Multiphase Detector
2 24 VDC (SELV)
5 SIGNAL OUTPUT
1 4 –20 mA with HART
6 OPTIONS
0
None (Model ED1 only – Four (4) 4-20mA outputs included as standard)
2
Two (2) 4-20mA outputs (Model ED2 only)
3
Three (3) 4-20 mA outputs (Model ED2 only)
4
Four (4) 4-20 mA outputs (Model ED2 only)
7 ACCESSORIES/MOUNTING
A
B
C
D
2 1
4 5 6 7
outperforms traditional technologies while going head-
to-head with nucleonic devices (e.g., Profilers) at a more
competitive total cost of ownership.
The Model ED2 benefits from the heavy algorithms
developed for the ED1 but allows two, three, or four
analog output configurations that are easier to price in
the upstream Oil & Gas market (E&P).
3 meter (10 foot) remote
6 meter (20 foot) remote
15 meter (50 foot) remote
30 meter (100 foot) remote
CLASSIFICATION
3 Explosion/Flame proof with I.S. outputs
C Non-Incendive, Increased Safety with I.S. outputs
9 HOUSING
1 Aluminum
2 316 Stainless steel
10 CONDUIT CONNECTION
0 3 ⁄ " NPT
4
M20 × 1.5
1
9 10
41