Entering Numeric Data Using Digit Entry; Entering Numeric Data Using Increment/Decrement - Genesis ED1 Installation And Operating Manual

63-601 Genesis Models ED1 & ED2 Multiphase Detector

1.5.2.3 Entering Numeric Data Using Digit Entry

This method is used to input numeric data, e.g., Probe
Length, set 4mA and set 20mA.
Push button
Moves up to the next highest digit (0,1,2,3....9
Up or decimal point). If held down the digits scroll
until the push button is released.
Moves down to the next lowest digit (9, 8, 7....0)
Down or decimal point). If held down the digits scroll
until the push button is released.
Moves the cursor to the left and deletes a digit. If
the cursor is already at the leftmost position,
Back
then the screen is exited without changing the
previously saved value.
Moves the cursor to the right. If the cursor is
Enter located at a blank character position, the new
value is saved.
All numeric values are left-justified, and new values are
entered from left to right. A decimal point can be entered
after the first digit is entered, such that .9 is entered as 0.9.
Some configuration parameters can have a negative value.
In this case, the leftmost position is reversed for the sign
(either "-" for a negative value, or "+" for a positive value).

1.5.2.4 Entering Numeric Data Using Increment/Decrement

Use this method to input the following data into parame-
ters such as Damping and Failure Alarm.
Push button
Increments the displayed value. If held down the
digits scroll until the push button is released.
Up Depending on which screen is being revised, the
increment amount may increase by a factor of 10
after the value has been incremented 10 times.
Decrements the displayed value. If held down the
digits scroll until the push button is released.
Depending on which screen is being revised, the
Down
decrement amount may increase by a factor of
10 after the value has been decremented 10
times.
Returns to the previous menu without changing
Back the original value, which is immediately redis-
played.
Accepts the displayed value and returns to the
Enter
previous menu.
Keystroke Action
Keystroke Action
11