Entering Character Data; Password Protection - Genesis ED1 Installation And Operating Manual

12

1.5.2.5 Entering Character Data

This method is used for parameters requiring alphanumer-
ic character entry, such as for entering tags, etc.
General Menu Notes:
Push button
Moves to the previous character (Z...Y...X...W).
Up If held down, the characters scroll until the push
button is released.
Moves to the next item character (A...B...C...D).
Down If held down, the characters scroll until the push
button is released.
Moves the cursor back to the left. If the cursor is
already at the leftmost position, then the screen
Back
is exited without changing the original tag char-
acters.
Moves the cursor forward to the right. If the
Enter cursor is at the rightmost position, then the
new tag is saved.

1.5.3 Password Protection

The Genesis has three levels of password protection to
restrict unapproved access to certain portions of the menu
structure that affect the operation of the system. The user
password can be changed to any numerical value up to
59999. When programmed for password protection, a
password is required whenever configuration values are
changed.
User Password
The User Password allows the customer to limit access to
the basic configuration parameters.
The default User Password implemented in the detector at
the factory is 0. With a password of 0, the device is no
longer password protected and any value in the basic user
menus can be adjusted without entering a confirming pass-
word.
NOTE: If a User Password is not known or has been misplaced, the
menu item New Password in the DEVICE SETUP/ADVANCED
CONFIG menu displays an encrypted value representing the
present password. Contact Technical Support with this
encrypted password to retrieve the original User Password.
63-601 Genesis Models ED1 & ED2 Multiphase Detector
Keystroke Action