IS
IS
2.5.1 Specific Conditions of Use
Transmitter:
1. The flamepaths of the equipment are not intended to be repaired. Consult the manufacturer if repair of the
flamepath joints is necessary.
2. Refer to the manufacturer's instructions to reduce the potential of an electrostatic charging hazard on the
equipment enclosure.
3. The transmitter shall be connected to a safety extra low-voltage circuit (SELV) with Um ≤ 30V
Probe:
1. Refer to the manufacturer's instructions to reduce the potential of an electrostatic charging hazard on the
equipment enclosure.
36
PROBE Pxx-xxx0-A0x-xx-xxx
705 ENTERPRISE ST AURORA, 60504 IL USA
R
705 ENTERPRISE ST AURORA, 60504 IL USA
R
SENSORS, TEST & CALIBRATION
FM
C
US
APPROVED
SENSORS, TEST & CALIBRATION
FM
C
US
APPROVED
63-601 Genesis Models ED1 & ED2 Multiphase Detector