Reset Function; Capabilities; Event History; Context-Sensitive Help - Genesis ED1 Installation And Operating Manual

63-601 Genesis Models ED1 & ED2 Multiphase Detector

2.4.2 Reset Function

A parameter labeled "Reset Parameter" is located at the end
of the DEVICE SETUP/ADVANCED CONFIG menu.
This parameter gives the user the ability to reset the config-
uration.
Unique to the Genesis is the ability for
"pre-configure" devices to customer requests. For that rea-
son, the Reset function will return the device back to the
state at which it left the factory.
It is recommended that
contacted as the Advanced User password will be required
for this reset.
2.4.3 Additional Diagnostic/Troubleshooting Capabilities

2.4.3.1 Event History

As a means for improved troubleshooting capability, a
record of significant diagnostic events is stored with time
and date stamps. A real time on board clock (which must be
set by the operator), will maintain the current time.

2.4.3.2 Context-sensitive Help

Descriptive information relevant to the highlighted parame-
ter in the menu will be accessible via the local display and
remote host interfaces. This will most often be a parameter-
related screen, but could also be information about menus,
actions (for example, Loop [Analog Output] Test, resets of
various types), diagnostic indicators, etc.
For example: Emulsion Top % Water: The percent water at
the top of the emulsion level.

2.4.3.3 Trend Data

Another valuable feature of the Genesis is the ability to
log several measured values (selectable from any of the
primary, secondary, or supplemental measured values) at a
configurable rate (for example, once every five minutes) for
a period ranging from several hours to a number of days
(depending on the configured sample rate and number of
values to be recorded). The data will be stored in non-
volatile memory with date and time information for
subsequent retrieval and visualization using the associated
Genesis DTM.
Magnetrol
Technical Support be
Magnetrol
to fully
33