11.3 Writing Objects to Servo Amplifier
By connecting the PC and a servo amplifier, the objects set with PANATERM Lite for GM can
be written directly to the servo amplifier.
1.
Start PANATERM Lite for GM.
2.
Click [Trans] on the toolbar.
The objects will be sent from PANATERM Lite for GM to the servo amplifier.
3.
Click the [EEP] button to write the objects to the EEPROM of the servo amplifier.
WUME-GM1ETCSU-01
11.3 Writing Objects to Servo Amplifier
11-9