Adding And Setting Up Servo Amplifiers - Panasonic GM1 Series User Manual

10.5 Adding and Setting up Servo Amplifiers

10.5 Adding and Setting up Servo Amplifiers

This section explains how to add device objects for servo amplifiers to a project and set them
up.
The description below explains how to add device objects for A5B servo amplifiers to a project
and how to set them up.
1.
Right-click the EtherCAT_Master_SoftMotion object in the navigator pane and then select
Add Device from the context-sensitive menu that is displayed.
The "Add Device" dialog box will be displayed.
2.
Select a device object for the servo amplifier.
10-10 WUME-GM1ETCSU-01