11.2 Writing Parameters to Servo Amplifier
11.2 Writing Parameters to Servo Amplifier
By connecting the PC and a servo amplifier, the parameters set with PANATERM Lite for GM
can be written directly to the servo amplifier.
1.
Start PANATERM Lite for GM.
2.
Click "Trans" on the toolbar.
The parameters will be sent from PANATERM Lite for GM to the servo amplifier.
● If you have changed parameters on a yellow background, click "EEP" on the toolbar to restart
the servo amplifier.
11-8
WUME-GM1ETCSU-01