11.2 Writing Parameters to Servo Amplifier
11.2 Writing Parameters to Servo Amplifier
Connect the PC with the servo amplifier and directly write the parameters set with PANATERM
Lite for GM to the servo amplifier.
1.
Start PANATERM Lite for GM.
2.
Click "Trans" on the toolbar.
The parameters will be sent from PANATERM Lite for GM to the servo amplifier.
● When changes were made to the parameters with yellow background, click "EEP" on the
toolbar to restart the servo amplifier.
11-6
WUME-GM1RTXSU-01