Daily Maintenance Procedures - Kodak 5500 User Manual

Daily maintenance
procedures
Cleaning the imaging
guides
5-2
Maintenance procedures that should be performed daily include
cleaning the imaging guides, feed and separator rollers and the paper
path.
To clean the imaging guides, follow the steps below:
IMPORTANT: Do not use any abrasive materials when cleaning the
imaging guides. This includes abrasive cleansers,
commercial solvents, paper towels, or coarse cloths.
1. Open the side access door.
2. Release and open the vertical transport plate by rotating the release
handle 180 clockwise.
3. Release and remove the front imaging guide by rotating the
thumbscrew 90 counterclockwise, and lifting the guide's two green
saddle mounts from the mounting shaft.
Front imaging guide
Thumbscrew
Magnets
Rear imaging guide
A-61070 September 1999