Image Address Formats - Kodak 5500 User Manual

Image address
formats
A-4
For example, perform the following steps to change from 1201 to
change it to DEC5:
1. Enter function code F92. The entry cursor appears over the first
fixed field character (1201).
2. Press the Up or Down arrow key to enter alpha entry mode.
3. If the letter D is not displayed, press the Up or Down arrow key until
it is displayed.
4. Use the Left or Right arrow key to position the flashing cursor over
the letter D.
5. Press Enter to place the letter D in the first fixed field character
position. Only the letter D appears in the display, with the entry
cursor appearing in the next character position.
6. Press the Up or Down arrow key to enter alpha entry mode.
7. If the letter E is not displayed, press the up or down arrow key until
it is displayed.
8. Use the Left or Right arrow key to position the flashing cursor over
the letter E.
9. Press Enter to place the letter E in the second fixed field character
position. The letters DE appear in the display, with the entry cursor
appearing in the next character position.
10. Press the Up or Down arrow key to enter alpha entry mode.
11. If the letter C is not displayed, press the Up or Down arrow key until
it is displayed.
12. Use the Left or Right arrow key to position the flashing cursor over
the letter C.
13. Press Enter to place the letter C in the third fixed field character
position. The letters DEC appear in the display, with the entry
cursor appearing in the next character position.
14. Press 5 to place the number 5 in the fourth fixed field character
position.
15. Press Enter to exit function code F92 and save the changes to the
image address.
The image address may be displayed in the status display, and printed
on the original documents as they are transported through the system.
The format in which the image address appears when displayed,
written, or printed is defined during installation for each mode.
The written/printed image address may appear in one of three formats:
Display leading zeros format (e.g., 004.003.002.001)
Suppress leading zeros format (e.g., 004.3.2.1)
Compress leading zeros format (e.g., 004.3.2.1)
NOTE: The format chosen does not affect the fixed field of the image
address; it is always displayed and printed in its entirety.
A-61070 September 1999