5.1.2
Choosing a Chart for the Current Airport
NOTE: The chart for the destination airport or loaded approach will
automatically be selected.
1) While viewing the Charts page of the FPL page group, press the SELECT soft
key to activate chart selection.
2) Turn the large MFD knob to highlight the field to the right of the airport
identifier.
Figure 5-4 Activate Chart Selection for the Current Airport
3) Turn the small MFD knob to highlight the desired chart.
4) Press ENT to accept and view the selected chart.
5-4
Figure 5-5 Choose Chart for the Current Airport
Garmin G600 Pilot's Guide
190-00601-02 Rev. B