Mfd Knobs - Garmin G600 Pilot's Manual

CDI
The CDI soft key toggles between selection of GPS or VOR/LOC as the active
navigation source. In a single GDU 620 system, the GDU CDI soft key will
change the source in the connected navigator and making a source change in
the navigator will be reflected in the GDU 620. In a dual GDU 620 system,
the CDI keys in the navigator will be disabled.
1-2
The 1-2 soft key toggles between the available receivers for selected navigation
source (i.e. GPS1 and GPS2 or VOR/LOC1 and VOR/LOC2). This soft key
will only be present if the system is configured for a second GPS or VOR/
LOC.
PFD
The PFD soft key displays the BRG1, BRG2, and Back soft keys. The BRG2
soft key will only be present if the system is configured for a second GPS or
VOR/LOC receiver.
BRG1
The BRG1 soft key cycles through the available bearing 1 indicator modes
(NAV1, GPS1, ADF, or None).
BRG2
The BRG2 soft key cycles through the available bearing 2 indicator modes
(NAV2, GPS2, ADF, or None). This soft key will only be present if the system
is configured for a second GPS or VOR/LOC.
Back
The BACK soft key returns to the pages default soft key options.
1.1.12.4

MFD Knobs

The MFD knobs are generally used for navigating and selecting information
on the MFD pages. Other uses of the knobs will be detailed in the affected
functions.
Small (Inner) MFD Knob
Selects a specific page within a page group. Pressing the small MFD knob
turns the selection cursor ON and OFF. When the cursor is ON, data may be
entered in the applicable window by turning the small and large MFD knobs.
190-00601-02 Rev. B Garmin G600 Pilot's Guide
1-11