Winds Aloft Altitude - Garmin G600 Pilot's Manual

Garmin g600 avionics display system pilot's guide
Hide thumbs Also See for G600:
Table of Contents

Advertisement

Winds Aloft Altitude

The Winds Aloft Altitude option allows you to select the altitude where below
that value Winds Aloft weather products will be shown on the selected MFD
Wx Data Link Map page (1, 2, or 3). Altitude can be selected in 3000 foot
increments from the surface up to 42,000 feet MSL.
Pressing the WIND DOWN or WIND UP soft keys steps down or up in the
3,000 foot increments.
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options . The cursor flashes on the
"Weather Setup" option. Press ENT
2) Turn the large MFD knob to highlight the Winds Aloft Altitude value.
3) Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
4-52
Figure 4-42 Winds Aloft Altitude Selection
.
Garmin G600 Pilot's Guide
190-00601-02 Rev. B

Advertisement

Table of Contents
loading

Table of Contents