Updating Garmin Databases; Flitecharts; Cycle Number And Revision - Garmin G600 Pilot's Manual

5.3

FliteCharts

FliteCharts™ resemble the paper version of National Aeronautical Charting
Office (NACO) terminal procedures charts. The charts are displayed with high-
resolution and in color for applicable charts.
FliteCharts database subscription is available from Garmin. Available data
includes:
• Arrivals (STAR)
• Departure Procedures (DP)
• Approaches
• Airport Diagrams
5.3.1

Cycle Number and Revision

FliteCharts data is revised every 28 days. Charts are still viewable during a
period that extends from the cycle expiration date to the disables date. FliteCharts
is disabled 180 days after the expiration date and are no longer available for
viewing upon reaching the disables date. When turning on the GDU 620, the
Power-up page indicates any of five different possible criteria for chart availability.
These indications are whether the databases are not configured, not available,
current, out of date, or disabled. See the table below for the various FliteCharts
Power-up page displays and the definition of each.
Power-up Page Display
190-00601-02 Rev. B Garmin G600 Pilot's Guide
Definition
Blank Line. G600 system
is not configured for
FliteCharts. Contact
a Garmin-authorized
service center for
configuration.
System is configured for
FliteCharts but no chart
database is installed.
Refer to Updating
Garmin Databases in
Appendix A for the
FliteCharts database.
5-11