Garmin G600 Pilot's Manual page 92

SafeTaxi
The SafeTaxi viewing range option allows you to select the map range where
below that value SafeTaxi information will be shown on the MFD. Map ranges
above the selected value will not show SafeTaxi. When Off is selected, SafeTaxi
information will not be shown.
Figure 3-45 Navigation Map Safe Taxi Range Selection
1) While viewing the Navigation Map Setup page and the Aviation Group active,
turn the large MFD knob to highlight the "SafeTaxi Range" option.
2) Turn the small MFD knob to change the highlighted value.
3) Press ENT to accept the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
3-34
Garmin G600 Pilot's Guide 190-00601-02 Rev. B