Selecting Items On The Map - Garmin G600 Pilot's Manual

3.3.7

Selecting Items on the Map

When the target pointer is placed on an object, the name of that object is
highlighted (even if the name wasn't originally displayed on the map). This
feature applies to airports, NAVAIDs, user-created waypoints, roads, lakes,
rivers — just about everything displayed on the map except route lines. When
an airport, NAVAID, or user waypoint is selected on the map display, you can
review information about the item.
1) While viewing the Navigation Map pages of the Map page group, press the
small MFD knob to activate panning.
2) Move the cursor with the small and large MFD knobs to highlight a feature.
2) Press ENT to display information about the highlighted feature.
3) Press the INFO soft key (if available) to view more information about the
highlighted feature.
4) Press the WX soft key (if available) to view TAF and METAR information.
5) Press the small MFD knob again to return to panning.
190-00601-02 Rev. B Garmin G600 Pilot's Guide
3-9