5.1.1
Chart Panning
More detail on the displayed chart can be viewed by zooming in with the
Range keys and moving the chart around with pan mode.
NOTE: Panning mode is indicated by the presence of scroll bars.
1) While viewing the Charts page of the FPL page group, press the RNG (Range)
2) After zooming in, you may only see part of the chart. Press the small MFD knob
to enter Pan mode and activate scroll bars on the edges of the chart. Turn the
large and small MFD knobs to move around the chart.
3) Press the small MFD knob to cancel the scroll bars and exit panning.
190-00601-02 Rev. B
Figure 5-3 Zooming and Scrolling Around a Chart
keys to zoom in and out.
Garmin G600 Pilot's Guide
Vertical Scroll Bar
Horizontal Scroll Bar
5-3