Garmin G600 Pilot's Manual page 177

Winds Aloft Data Viewing Range
The Winds Aloft Data Viewing Range option allows you to select the map
range where below that value Winds Aloft weather products will appear on the
selected MFD Wx Data Link Map page (1, 2, or 3). When Off is selected, Winds
Aloft will not be shown.
Figure 4-41 Winds Aloft Data Viewing Range Selection
1) While viewing a WX Data Link Map page of the WX page group, press the
MENU key to display the Page Menu Options . The cursor flashes on the
"Weather Setup" option. Press ENT
2) Turn the large MFD knob to highlight the Winds Aloft Data Viewing Range
value.
3) Turn the small MFD knob to highlight the desired value. Press ENT to accept
the displayed value. The next option will be highlighted.
4) Press the small MFD knob to cancel selection or to end editing and return to
the Navigation Map page or turn the large MFD knob to the next option.
190-00601-02 Rev. B
.
Garmin G600 Pilot's Guide
4-51