Altitude Display; Changing The Altitude Display Mode - Garmin G600 Pilot's Manual

4.2.2

Altitude Display

4.2.2.1

Changing the altitude display mode:

1) While viewing the Traffic page of the MAP page group, press the OPERATE
soft key to begin displaying traffic. "TAS OPERATING" is displayed in the Traffic
mode field.
2) Press the ALT MODE soft key to change the altitude volume. Select the desired
altitude volume by pressing the BELOW, NORMAL, ABOVE, or UNREST
(unrestricted) soft keys. The selection is displayed in the Altitude mode field.
Altitude Mode
Unrestricted
3) Press the STANDBY soft key to place the system in the Standby mode.
Or
1) Press the MENU key.
2) Turn the small MFD knob to select one of the following:
• BELOW
• NORMAL
• ABOVE
• UNREST (unrestricted)
3) Select the ENT key.
4-10
Below
Normal
Above
Table 4-2 Displayed Traffic Range
Garmin G600 Pilot's Guide
Displayed Traffic Range
-9700 ft to 2700 ft
-2700 ft to 2700 ft
-2700 ft to 9700 ft
All Traffic Shown
190-00601-02 Rev. B